Anatomical study of the maxillary sinus: which characteristics can influence its volume?

PURPOSE: To investigate whether there is a relationship between the volume of the maxillary sinus and individual parameters such as gender, side, posterior tooth absence, sinus membrane thickening, bony septa, vertical and sagittal skeletal patterns. METHODS: The tomographic volume of the maxillary sinus from 211 individuals (422 sides) was evaluated using Horos DICOM Viewer Software. Bony septa and sinus membrane thickening were classified as absent or present. At the same time, loss of one or more teeth in the posterior region of the maxilla (except for the third molars) was considered. The t test was applied to analyze maxillary sinus volume according to gender, age, side, posterior tooth absence, sinus membrane thickening and bony septa. A one-way analysis of variance (ANOVA) with Tukey's post-hoc test was applied to compare sagittal and vertical patterns. Pearson's correlation coefficient was also used to verify the association between maxillary sinus volume, age and skeletal patterns. RESULTS: Concerning the sagittal skeletal pattern, a statistically significant difference was observed between Classes II and III (p = 0.05) and it was confirmed by the Pearson's correlation coefficient (r = - 0.107/p = 0.029). No statistically significant differences were observed between the maxillary sinus volume according to gender (p = 0.06), side (p = 0.37), posterior tooth absence (p = 0.92), sinus membrane thickening (p = 0.47), bony septa (0.89) and vertical skeletal pattern (p = 0.67). No significant differences were observed with age (r = - 0.076/p = 0.109) and the vertical skeletal pattern (r = - 0.078/p = 0.108). CONCLUSION: Maxillary sinus volume was influenced by the sagittal skeletal pattern and was higher in Class III individuals.

Root Curvature in Non-Syndromic Oral Clefts: A Case-Control Study in a Brazilian Population.

OBJECTIVE: This study assesses the degree of root curvature in patients with non-syndromic cleft lip and/or palate (NSCL/P). DESIGN: Retrospective. Case-control study. SETTING: Root curvature was assessed in lower premolars and molars in 800 panoramic radiographs: 400 from patients with cleft and 400 from healthy control individuals. Root curvature was classified according to its angulation, as well as its apical, medial, or coronal localization. RESULTS: The frequency of mild curvature in the NSCL/P group compared to the control group was higher in premolars especially in the left second premolar in cleft palate (OR: 6.91; 95% CI: 3.23-14.77; P < .0001). The frequency of moderate curvature in molars was significantly higher in the cleft group, with the highest risk in the right first molar in the cleft lip group (OR: 2.74; 95% CI: 1.67-4.52; P < .0001). Inclination was more frequently observed in the apical third of the root in the group with cleft, whereas for the control group, the curvature was more frequent in the medial third. In patients with cleft, the OR of curvature in the apical third was significant in premolars (left lower second premolar: Cleft lip, OR: 1.91; 95% CI: 1.04-3.52; P = .03; right lower second premolar: Cleft lip, OR: 1.91, 95% CI: 1.04-3.50; P = .03, cleft lip and palate, OR: 1.75; 95% CI: 1.12-2.73; P = .01). CONCLUSION: The results of the current study indicate differences in root curvature in patients with non-syndromic cleft lip and/or palate, which should be considered during the dental treatment planning of patients.

Assessment of the relationship between tooth inclination and gingival and alveolar bone dimensions using computed tomography of the maxillary anterior teeth: a cross-sectional study.

OBJECTIVE: The present study aimed to investigate the relationship between tooth inclination and gingival and bone dimensions in maxillary anterior teeth. METHODS: This cross-sectional study included cone-beam computed tomography (CBCT) images of 160 maxillary anterior teeth (30 individuals). Tooth inclination, gingival and bone thickness, and distances from cementoenamel junction to alveolar bone crest and gingival margin were measured in the labial surface. The correlations were analyzed using Pearson and partial correlation tests (p≤0.05). RESULTS: In the central incisors, tooth inclination was positively and significantly related to apical bone thickness (R = 0.34, p= 0.001). In the canines, tooth inclination was negatively and significantly related to cervical bone thickness (R = - 0.34, p= 0.01) and positively associated to apical bone thickness (R = 0.36, p= 0.01) and to gingival margin-cementoenamel junction distance (R = 0.31, p= 0.03). In the lateral incisors, tooth inclination was not associated with gingival or bone dimensions. CONCLUSIONS: In the central incisors, the greater the labial tooth inclination, the greater is the apical bone thickness. In the canines, the greater the labial tooth inclination, the smallest is the cervical bone thickness, the greater is the apical bone thickness, and the greater is the gingival margin. Gingival and bone dimensions should be assessed when planning orthodontic treatment involving buccal movement of central incisors and canines.

Tomographic assessment of infrazygomatic crest bone depth for extra-alveolar miniscrew insertion in subjects with different vertical and sagittal skeletal patterns.

OBJECTIVE: To evaluate bone availability at the infrazygomatic crest for extra-alveolar bone miniscrew insertion in subjects with different vertical and sagittal skeletal patterns. SETTING AND SAMPLE POPULATION: Measurements of the infrazygomatic crest were performed on multislice computed tomography scans from 58 adults with different skeletal patterns. MATERIALS AND METHODS: Infrazygomatic crest bone depth was measured at 4, 5 and 6 mm from the cementoenamel junction (CEJ) of the maxillary first molar at three different angles (60°, 70° and 80°) in the first molar occlusal plane. The sagittal and vertical skeletal patterns were determined. Analysis of variance followed by Tukey's post hoc test was used (P ≤ .05). RESULTS: Bone depth was greater near the CEJ (8.7 ± 3.1 mm) and lower in the apical area (5.8 ± 2.7 mm). In Class II subjects, considering 6 mm from the CEJ, there was a significantly lower depth at the 80° angle (5.4 ± 2.5 mm) than at 60° (8.6 ± 3.5 mm; P = .007). In mesofacial subjects, considering 5 and 6 mm from the CEJ, bone depth was lower at 80° (5.7 ± 3.2 mm and 5.3 ± 2.5 mm) than at 60° considering 4 mm from the CEJ (P ≤ .019). CONCLUSION: Bone availability was lower at the apical level, especially in Class II and mesofacial subjects. Therefore, when the planned insertion site is located in the apical direction, it is recommended to choose shorter miniscrews (2.0 x 12mm) and a smaller insertion angle (60°) and/or to plan a miniscrew bone insertion deep enough to allow bicortical fixation.

Assessment of the relationship between tooth inclination and gingival and alveolar bone dimensions using computed tomography of the maxillary anterior teeth: a cross-sectional study

ABSTRACT Objective: The present study aimed to investigate the relationship between tooth inclination and gingival and bone dimensions in maxillary anterior teeth. Methods: This cross-sectional study included cone-beam computed tomography (CBCT) images of 160 maxillary anterior teeth (30 individuals). Tooth inclination, gingival and bone thickness, and distances from cementoenamel junction to alveolar bone crest and gingival margin were measured in the labial surface. The correlations were analyzed using Pearson and partial correlation tests (p≤0.05). Results: In the central incisors, tooth inclination was positively and significantly related to apical bone thickness (R = 0.34, p= 0.001). In the canines, tooth inclination was negatively and significantly related to cervical bone thickness (R = - 0.34, p= 0.01) and positively associated to apical bone thickness (R = 0.36, p= 0.01) and to gingival margin-cementoenamel junction distance (R = 0.31, p= 0.03). In the lateral incisors, tooth inclination was not associated with gingival or bone dimensions. Conclusions: In the central incisors, the greater the labial tooth inclination, the greater is the apical bone thickness. In the canines, the greater the labial tooth inclination, the smallest is the cervical bone thickness, the greater is the apical bone thickness, and the greater is the gingival margin. Gingival and bone dimensions should be assessed when planning orthodontic treatment involving buccal movement of central incisors and canines.

RESUMO Objetivo: O presente estudo teve como objetivo investigar a relação entre a inclinação dentária e as dimensões ósseas e gengivais em dentes anteriores superiores. Métodos: Esse estudo transversal incluiu imagens de tomografia computadorizada de feixe cônico (TCFC) de 160 dentes anteriores superiores divididos em três grupos (incisivo central, incisivo lateral e canino). Todos os pacientes tinham 18 anos ou mais, não tinham tratamento ortodôntico prévio nem história clínica que pudesse afetar as dimensões ósseas ou gengivais. A inclinação dentária, a espessura do osso e da gengiva e as distâncias da junção cemento-esmalte à crista óssea alveolar e à margem gengival foram medidas na face vestibular. As correlações foram analisadas por meio dos testes de Pearson e de correlação parcial (p≤0,05). Resultados: Nos incisivos centrais, a inclinação dentária foi positiva e significativamente relacionada à espessura do osso apical (R = 0,34, p= 0,001). Nos caninos, a inclinação dentária foi negativa e significativamente relacionada à espessura do osso cervical (R = - 0,34, p= 0,01) e positivamente associada à espessura do osso apical (R = 0,36, p= 0,01) e à distância entre a margem gengival e a junção cemento-esmalte (R = 0,31, p= 0,03). Nos incisivos laterais, a inclinação do dente não foi associada às dimensões do osso ou da gengiva. Conclusões: Nos incisivos centrais, quanto maior a inclinação vestibular do dente, maior a espessura do osso apical. Nos caninos, quanto maior a inclinação vestibular do dente, menor a espessura do osso cervical, maior a espessura do osso apical e maior a margem gengival. As dimensões ósseas e gengivais devem ser avaliadas ao se planejar o tratamento ortodôntico envolvendo a movimentação vestibular dos incisivos centrais e caninos.

Cone-beam computed tomographic evaluation of dimensional hard tissue changes following alveolar ridge preservation with leucocyte and platelet-rich fibrin techniques: a pilot study / Avaliação tomográfica computadorizada de feixe cônico das alterações dimensionais de tecido duro após preservação de crista alveolar com técnicas de fibrina rica em leucócitos e plaquetas: um estudo piloto

Objective: This study evaluated the effect of leucocyte and platelet-rich fibrin (L-PRF) techniques used in alveolar ridge preservation on dimensional hard tissue changes of the alveolar ridge assessed using cone-beam computed tomography (CBCT) scans. Material and Methods: Elective alveolar ridge preservation surgeries were performed on seven systemically healthy patients who underwent single posterior tooth extraction. Patients were randomly treated with PRF mixed with a commercial bone xenograft (n = 3) or PRF plug (n = 4). CBCT scans were taken immediately after tooth extraction and then four months later, just before implant surgery. Dimensional alterations in socket height (SH), socket area (SA) and socket volume (SV) were evaluated on CBCT scans by percentage differences before and after treatments. Results: Sockets treated with PRF plus bone xenograft had a tendency to maintain alveolar bone dimensions over time (SH= 11.22% to 82.74%, SA= 1.84% to 48.91% and SV= 9.11% to 203.62%), while sockets treated only with PRF plug technique presented only a modest increase in height (SH= 1.47% to 11.11%) but greater alveolar ridge resorption confirmed by a decrease in socket area and volume dimensions (SA= 0.21% to -24.09% SV= 8.53% to -54.12%). Conclusion: Within the limitations of this study, the maintenance of alveolar socket dimensions was observed when PRF was associated with a xenograft. However, the loss of alveolar ridge dimensions was not entirely prevented by PRF treatment alone.(AU)

Objetivo: Este estudo avaliou o efeito das técnicas de fibrina rica em leucócitos e plaquetas (L-PRF) usadas na preservação da crista alveolar em alterações dimensionais de tecido duro da crista alveolar avaliadas por tomografia computadorizada de feixe cônico (CBCT). Material e Métodos: Foram realizadas cirurgias eletivas de preservação da crista alveolar em sete pacientes sistemicamente saudáveis que foram submetidos a uma única extração dentária posterior. Os doentes foram tratados aleatoriamente com PRF misturado com um xenoenxerto ósseo comercial (n = 3) ou com PRF plug (n = 4). CBCT foi realizada imediatamente após a extração dentária e quatro meses depois, imediatamente antes da cirurgia de implante. Alterações dimensionais na altura do alvéolo (SH), área do alvéolo (SA) e volume do alvéolo (SV) foram avaliadas em exames CBCT por diferenças percentuais antes e depois dos tratamentos. Resultados: Os alvéolos tratados com PRF mais xenoenxerto ósseo apresentaram tendência a manter as dimensões ósseas alveolares ao longo do tempo (SH= 11.22% a 82.74%, SA= 1.84% a 48.91% e SV= 9.11% a 203.62%), enquanto alvéolos tratados apenas com a técnica de PRF plug apresentaram apenas um aumento modesto na altura (SH= 1.47% a 11.11%), mas uma maior reabsorção alveolar confirmada pela redução das dimensões de área e volume do alvéolo (SA= 0.21% a -24.09% SV= 8.53% a -54.12%). Conclusão: Dentro das limitações deste estudo, a manutenção das dimensões alveolares foi observada quando o PRF foi associado ao xenoenxerto. No entanto, a perda das dimensões alveolares não foi totalmente evitada pelo tratamento apenas com PRF. (AU)

Efficacy of digital radiography for detecting a second mesiobuccal canal adjacent to unfilled or filled canals.

The aim of this study was to assess the diagnostic accuracy of digital periapical radiography for the detection of the second mesiobuccal (MB2) canal when the adjacent canals are unfilled or filled with gutta percha. Forty human maxillary first molars were selected, 20 of which had an MB2 canal. The presence or absence of the MB2 canal was confirmed using microcomputed tomography. Digital periapical radiographs of each tooth were obtained from 3 horizontal angles before and after the adjacent root canals were filled with gutta percha. Three experienced oral radiologists evaluated all images and indicated the presence or absence of the MB2 canal using a confidence scale of 5 points. To assess intraobserver and interobserver agreement, weighted kappa coefficients were calculated. The diagnostic test (sensitivity, specificity, and accuracy) and area under the receiver operating characteristic curve (Az) values were calculated and compared between groups (n = 40): radiographs of the first molars with unfilled adjacent canals and radiographs of the same teeth with filled adjacent canals. For all observers, intraobserver reproducibility ranged from substantial (0.70) to almost perfect (0.86), and interobserver reproducibility ranged from fair (0.39) to substantial (0.67). Similar values of specificity and Az for the detection of the MB2 canal were observed with unfilled and filled adjacent canals. The sensitivity and accuracy were slightly greater when the adjacent root canals were filled with gutta percha. Detection of the MB2 canal on digital periapical radiographs can be challenging even when obtained at varying horizontal angles, and the presence of gutta percha does not influence the detection.

Evaluation of alveolar process resorption after tooth extraction using the socket shield technique without immediate installation of implants: a randomised controlled clinical trial.

Our aim was to evaluate resorption of the alveolar ridge using the socket shield technique (SST) without immediate placement of dental implants. This randomised controlled clinical trial included 27 patients: 14 maxillary non-molar teeth were partially extracted using the SST (test group) and 13 were extracted using a minimally traumatic extraction approach (control group). Alterations in height and thickness of the alveolar ridge were evaluated by cone beam computed tomograms taken immediately after, and 100 days after, surgery. Minor resorption was observed in the height of the buccal and palatal plates, without intergroup difference (p ≥ 0.10). The test group showed significantly better preservation of the buccal-to-palatal crest dimension (p ≤ 0.05). In the control group, preservation of buccal plate thickness was significantly greater (p ≤ 0.05), but intragroup vertical resorption of the buccal plate and reduction in the buccal-to-palatal crest distance were greater (p ≤ 0.05). The SST without the immediate placement of implants showed greater preservation of the buccal-to-palatal crest dimension and lower preservation of buccal wall thickness compared with minimally traumatic extraction. In addition, it provided superior maintenance of the baseline buccal wall height. The modified SST is a promising approach, but factors that interfere with the results should be investigated.

Computer tomographic differential diagnosis of ameloblastoma and odontogenic keratocyst: classification using a convolutional neural network.

OBJECTIVE: To analyse the automatic classification performance of a convolutional neural network (CNN), Google Inception v3, using tomographic images of odontogenic keratocysts (OKCs) and ameloblastomas (AMs). METHODS: For construction of the database, we selected axial multidetector CT images from patients with confirmed AM (n = 22) and OKC (n = 18) based on a conclusive histopathological report. The images (n = 350) were segmented manually and data augmentation algorithms were applied, totalling 2500 images. The k-fold × five cross-validation method (k = 2) was used to estimate the accuracy of the CNN model. RESULTS: The accuracy and standard deviation (%) of cross-validation for the five iterations performed were 90.16 ± 0.95, 91.37 ± 0.57, 91.62 ± 0.19, 92.48 ± 0.16 and 91.21 ± 0.87, respectively. A higher error rate was observed for the classification of AM images. CONCLUSION: This study demonstrated a high classification accuracy of Google Inception v3 for tomographic images of OKCs and AMs. However, AMs images presented the higher error rate.

Comparison of digital image displays performance in the detection of artificial internal root resorptions lesions.

OBJECTIVE: To compare the diagnostic efficacy of different devices for visualizing digital images in detecting simulated internal root resorption (IRR). METHODS: 26 uniradicular human teeth were sectioned along its long axis and randomly divided into two groups. Then, they were submerged in hydrochloric acid (HCl) P.A 37% at different times to make two types of defects: Type 1 (2 hours), and type 2 (3 hours). Digital periapical radiographs were acquired in three moments: before section, after section and after immersion in acid. The images were evaluated on three different devices: 27-inch iMac Desktop, 8-inch Android Tablet, and 5.5-inch iPhone 8 Plus using a 5-point scale. RESULTS: The sensitivity and accuracy values were higher with the use of the Android Tablet, for both types of defects. For the values of the area under ROC curve, higher results were observed with the Android Tablet and lower results with the iMac, showing a significant difference (p < 0.05) when comparing the use of the iMac with the Android Tablet and iPhone 8, for type 1 defects. When comparing the different devices, in the evaluation of images of type 2 defects, the values showed no statistical difference, regardless of the device evaluated (p > 0.05). CONCLUSIONS: The size of the lesion interferes with the detection capacity in the image. However, the use of portable devices does not impair the diagnosis of IRR, regardless of size and the dental practioners may use different devices/display, under optimal viewing conditions, to detect IRR lesions, without jeopardizing the diagnostic ability.

Tomographic evaluation of buccal bone in different skeletal patterns and incisors inclination.

OBJECTIVE: The aim of this study was to correlate the absence of BB with skeletal patterns and incisor inclination using cone-beam computed tomography (CBCT). METHODS: The sample comprised CBCT images of 45 patients undergoing orthodontic treatment. BB was classified in each third of the anterior teeth as critical, slender, regular, and thick. The skeletal pattern was determined by the ANB (A point, nasion, B point) angle and the incisor inclination using the 1.NA and 1.NB measurements and the interincisal angle (1:1). RESULTS: In both analyses, the skeletal pattern of class II revealed better BB in the cervical and middle thirds than classes I and III. A higher proportion of critical BB was found in the middle thirds, and the apical third presented the best regular and thick BB conditions, mainly class I. Less BB was observed in middle and apical thirds in the upper incisors and in cervical thirds in lower incisors, mostly when they were more upright. CONCLUSIONS: Knowledge of alveolar bone height and thickness can alter the treatment plan in orthodontics. During orthodontic treatment, more attention should be paid to the lower incisors and vertical teeth because of poor BB conditions, especially in class III skeletal patterns.

Gingival Biotype and Its Relationship With the Maxillary Membrane and Lateral Wall Thickness.

The purpose of this study was to analyze the risk of the maxillary sinus lift technique and the correlation between the thickness of the gingiva, maxillary sinus membrane, and the maxillary sinus lateral wall. Cone-beam computerized tomograhy (CBCT) records of 32 adult dentate patients (10 male/22 female) were analyzed. The gingival thickness records of the dental units were compared with the thickness measurements of the membrane and lateral wall of the maxillary sinus. The gingival biotypes varied between 1.1 mm (thin) and 1.6 mm (thick), with a small association with sex. The thickness of the sinus membrane presented a small association between sexes (0.2 mm, female/0.3 mm, male) and gingival biotypes (Cohen d = .52). The lateral wall presented a weak association between the biotypes (1.3 mm, thin/1.1 mm, thick). There was also no correlation between the membrane and lateral wall (r = -.22). The volume dimension related to the graft area of the sinus was 4 mm3 for men and 5 mm3 for women. There was a weak correlation of gingival thickness compared with membrane thickness and lateral wall of the sinus (r = .304/r = -.31). Gingival thickness does not appear to be a reliable thickness predictor of the membrane or lateral wall of the maxillary sinus. The analysis of maxillary sinus anatomical structures through CBCT is the most reliable technique to identify the thickness of the membrane and lateral wall of the maxillary sinus before surgery. We believe that new studies are necessary to confirm our findings.

Assessment of the mandibular buccal shelf for orthodontic anchorage: Influence of side, gender and skeletal patterns.

OBJECTIVES: To evaluate bone height and thickness in the mandibular buccal shelf region and to compare differences between anatomical sites according to gender, side and vertical and sagittal skeletal patterns. SETTINGS AND SAMPLE POPULATION: Multislice computed tomography (MSCT) images of 94 subjects (51 females and 43 males) were previously obtained as part of preoperative planning for orthognathic surgery. METHODS: Measurements were performed in three different regions of the mandibular buccal shelf: mesially, towards the central groove and distally to the second molars. Bone thickness measurements were obtained perpendicularly 3, 5 and 7 mm below the bone crest towards the mandible outer cortex. Bone height was measured 3 mm away from the bone crest perpendicularly to the outer cortex of the base of mandible. RESULTS: There was an increase in bone thickness in the posterior and basal directions. The increase in bone thickness ranged from 1.8 to 7.1 mm. Greater bone height was found in the anterior direction. The increase in bone height ranged from 17.5 to 22.5 mm. Hypodivergent and Class III subjects showed significantly greater bone thickness (P < .05). Significantly greater bone height was found mesially to the second molar in Class III subjects compared with Class I subjects (P < .05) and in hyperdivergent males compared with hypodivergent males (P < .05). CONCLUSIONS: The region distal to the second molar is the most appropriate for the insertion of extra-alveolar mini-screws in terms of bone thickness. Hypodivergent and Class III subjects showed greater bone thickness in the mandibular buccal shelf region.

Tomographic evaluation of infrazygomatic crest for orthodontic anchorage in different vertical and sagittal skeletal patterns.

BACKGROUND: Analysis of the anatomy of the region during preoperative planning is very important in order to minimize the risks of undesired movements in the supporting teeth or even damage to important structures such as the maxillary sinus. To the best of our knowledge, no study evaluated the relationship of these skeletal patterns with the anatomy of the infrazygomatic crest. The aim of this study was to evaluate the tomographic measurements of the infrazygomatic crest for placement of temporary anchorage devices in individuals with different vertical and sagittal skeletal patterns. MATERIAL AND METHODS: The measurements were analyzed in three regions in the crest of 67 patients above the maxillary first molar: A slice in the long axis of the mesiobuccal root, a slice passing through the center of the furcation area of the tooth, and another slice in the long axis of the distobuccal root. In each of these slices five measurements of the thickness of the infrazygomatic crest were performed, with a difference of 1 mm between them. The sagittal skeletal pattern was determined by the ANB angle and the vertical skeletal pattern by the SN.GoGn angle. RESULTS: The bone thickness of the crest tended to decrease gradually in the apical direction. There was no difference between different vertical and sagittal skeletal patterns. CONCLUSIONS: The individual parameters did not have significant influence in the thickness of the infrazygomatic crest. Key words:Tomography, X-Ray Computed, orthodontics, mini-implant, infrazygomatic crest, maxilla.

Abordagem cirúrgica conservadora de fibroma ossificante em localização atípica da mandíbula: relato de caso / Conservative surgical approach of ossifying fibroma in atypical location of the jaw: case report

O fibroma ossificante (FO) é uma neoplasia fibro-óssea benigna da região craniofacial de origem odontogênica, formado a partir de células mesenquimais multipotentes do ligamento periodontal, as quais são capazes de formar osso, tecido fibroso e cemento. Acredita-se que exodontias prévias, infecções, trauma ou uma perturbação de origem congênita na maturação óssea poderiam servir como fatores predisponentes para o desenvolvimento do FO. Radiograficamente, as lesões de FO iniciais são representadas por uma imagem radiolúcida, unilocular, redonda ou oval, de margem bem circunscrita. No estágio tardio, o componente mineralizado é circundado por uma fina cápsula fibrosa representada por uma linha radiolúcida delgada, que envolve toda a lesão. O objetivo deste trabalho é discutir a abordagem cirúrgica de um FO localizado em região atípica da mandíbula. Relato de caso: paciente leucoderma, 18 anos de idade, sexo feminino, cursando com aumento de volume em região posterior mandibular direita. No exame de imagem, identificou-se uma lesão mista, bem definida, não corticalizada, medindo aproximadamente 3 cm x 2,5 cm. Após realização de biópsia incisional, confirmou-se o diagnóstico de FO. Sendo assim, optou-se pela curetagem acompanhada de uma osteotomia periférica da lesão e reabilitação da região com enxerto ósseo liofilizado, além da instalação de uma placa de reconstrução na base da mandíbula do sistema 2.4 mm. Considerações finais: É necessário ter conhecimento sobre as lesões de aspecto radiográfico misto, que podem fazer diagnóstico diferencial com o FO, para que possa ser realizada uma correta intervenção, visto que para cada lesão há uma abordagem diferente.(AU)

The ossifying fibroma (FO) is a benign fibro-osseous neoplasm of the craniofacial region of odontogenic origin, formed from multipotent mesenchymal cells of the periodontal ligament, which are capable of forming bone, fibrous tissue and cementum. It is believed that previous exodontia, infections, trauma or a disturbance of congenital origin in bone maturation could serve as predisposing factors for FO development. Radiographically, the initial FO lesions are represented by a radiolucent, unilocular, round or oval image with well circumscribed margin. In the late stage, the mineralized component is surrounded by a thin fibrous capsule represented by a thin radiolucent line, which surrounds the entire lesion. The objective of this work is to discuss the surgical approach of a FO located in the atypical region of the mandible. Case report: leucoderma patient, 18 years, female, it were possible to note a slight volume increase in the posterior mandible region. The imaging examination identified a mixed lesion, well defined, however non-corticalised, measuring about 3 cm x 2.5 cm. The patient was submitted to an incisional biopsy and the diagnosis of ossifying fibroma was confirmed. We opted for a curettage followed by a peripheral osteotomy of the lesion and rehabilitation of the region with lyophilized bovine bone graft, besides the installation of a rebuilding plate at the base of the mandible system 2.4mm. Final considerations: it is necessary to have knowledge about lesions of mixed radiographic appearance, which can make differential diagnosis with FO so that a correct intervention can be performed, since for each lesion we have a different approach.(AU)

Assessment of fractal dimension and panoramic radiomorphometric indices in women with celiac disease.

OBJECTIVES: To assess the panoramic radiomorphometric indices and fractal dimension in women with celiac disease. METHODS: The sample consisted of 20 women with celiac disease and 20 healthy women (control group). The mandibular cortical index classification, panoramic mandibular index, mental index, and fractal dimension were evaluated on panoramic radiographs. One-way ANOVA with post hoc Tukey test was used for comparison of the linear measurements and fractal dimension between the celiac and control groups, adopting a significance level of 5% RESULTS: There was no significant difference in panoramic radiomorphometric indices or fractal dimension between the celiac and control groups. CONCLUSIONS: Panoramic radiomorphometric indices and fractal dimension revealed no significant bone changes in women with celiac disease.

Canalis Sinuosos mimetizando reabsorção radicular: relato de caso / Canalis sinuosus mimicking root resorption: case report

Relato de caso: Relatar um caso de canal acessório do Canalis Sinuosos, localizado por palatino à raiz do dente 21 que, na radiografia panorâmica, foi observada como uma área radiolúcida sobreposta aos terços médio-apical dente 21, indicando reabsorção radicular, sendo indispensável uma investigação acurada por tomografia computadorizada de feixe cônico (TCFC). Conclusão: A TCFC se mostrou eficiente na identificação do Canalis Sinuosos em relação à radiografia panorâmica, possibilitando um correto diagnóstico para o caso.

Case report: This report describes a case of Canalis sinuosus accessory canal, lingually to the root of the tooth 21, that was observed on panoramic radiograph as a radiolucent area superimposed over the middle and apical thirds, indicating root resorption. However, cone-beam computed tomography (CBCT) recommended for an accurated diagnosis of the case disclose the presence of this anatomic variation. Conclusion: CBCT was more accurate in detection of Canalis sinuosus than panoramic radiography.

Avaliação clínica, radiográfica e tomográfica de fraturas radiculares: série de casos / Clinical, radiographic and tomographic evaluation of root fractures: case series

Introdução: o diagnóstico de fratura radicular é difícil, pois não há sinais/sintomas clínicos e características radiográficas patognomônicas, podendo ser confundido com um insucesso no tratamento endodôntico e até mesmo com doença periodontal. Objetivo: descrever as características clínicas, radiográficas e tomográficas em dentes com suspeita de fratura radicular. Métodos: a amostra foi composta por seis indivíduos cujos dados clínicos foram coletados, realizados testes de percussão vertical e horizontal, verificando se o dente apresentava mobilidade dentária e bolsa periodontal. Achados radiográficos e tomográficos foram avaliados em relação à presença de fratura radicular e de lesão periapical e/ou perda óssea associada ao terço apical/lateral da raiz para se obter o diagnóstico complementar da fratura radicular. Resultados: os achados clínicos mais prevalentes foram percussões vertical e horizontal positivos seguidos de dor e mobilidade. Os exames por imagem evidenciaram que todos os casos de suspeita de fratura radicular estavam relacionados a dentes com pino metálico. Em apenas um caso, não foi possível visualizar a lesão periapical e/ou perda óssea e a fratura na radiografia periapical, sendo detectadas nas imagens tomográficas. Conclusões: os achados clínicos de suspeita de fraturas radiculares são muito variáveis, necessitando correlacioná-los com exames de imagem. A TCFC se mostrou mais eficaz que a radiografia periapical na detecção da linha de fratura, porém esses dois exames podem ser utilizados para complementar o exame clínico e alcançar um diagnóstico mais acurado..

Introduction: the diagnosis of dental fracture is usually difficult because there are no pathognomonic clinical signs/symptoms and radiographic characteristics, and may be mistaken for failure of endodontic treatment and even periodontal disease. Purpose: to describe clinical, radiographic and tomographic characteristics in teeth with suspected root fracture. Methods: the sample consisted of 06 individuals and their clinical data were collected. Vertical and horizontal percussion tests were performed, verifying tooth mobility and periodontal pocket. In relation to radiographic and tomographic findings, the presence of root fracture and periapical lesion and/or bone loss associated with the apical/lateral third of the root were evaluated in order to obtain the diagnosis of root fracture. Results: the most prevalent clinical findings were positive vertical and horizontal percussions followed by pain and mobility. Imaging tests showed that all cases of suspected root fracture were related to teeth with metallic post. In only one case, it was not possible to visualize the periapical lesion and/or bone loss and fracture in the periapical radiography, being detected in tomographic images. It`s possible to conclude with the analysis of some clinical cases that cone-beam computed tomography favors accuracy and precision regarding the visualization, location and extension of root fracture, as well as periapical alterations. Conclusions: the clinical findings of suspected root fractures are very variable, requiring to correlate them with imaging exams. The CBCT was more effective than the periapical radiography in the detection of the fracture line, but these two exams can be used to complement the clinical examination and reach a more accurate diagnosis.

Does the presence of maxillary central incisor edge asymmetry influence the perception of dentofacial esthetics in video analysis?

OBJECTIVE: To investigate the influence of incisal edge asymmetry of the maxillary central incisors on dentofacial esthetics among orthodontists, prosthodontists, and laypersons using video analysis. MATERIALS AND METHODS: Full-face films of a 52-year-old afro-descendant woman displaying various levels of incisal wear in the esthetic zone were captured. An acrylic resin mockup was made of the maxillary anterior region, enabling the reproduction of an attractive smile and restoring tooth wear. Four different levels of incisal asymmetry between the upper central incisors in 0.5 mm increments were prepared from this mockup. A film was made for each level of asymmetry (0.5, 1.0, 1.5, and 2.0) and one with no asymmetry, with the patient repeating a sentence, totaling five films. After a pilot study and sample calculation, the films were evaluated by 138 examiners: 46 orthodontists, 46 laypeople, and 46 prosthodontists. Each examiner evaluated the dentofacial esthetics of each film using visual analog scales. Data collected were statistically analyzed. RESULTS: Highest scores were awarded to the film with no asymmetry between upper centrals and the one with 0.5 mm of asymmetry. The asymmetries of 1.5 mm and 2.0 mm had the lowest scores from all three groups. CONCLUSIONS: The results of this video analysis indicate that asymmetries equal to or greater than 1.0 mm between the upper central incisors edges jeopardize dentofacial esthetics.